- Contact Person : Ms. Wu Tracy
- Company Name : Shanghai Yongming Machinery Manufacturing Co., Ltd.
- Tel : 86-21-57604761
- Fax : 86-21-57604676
- Address : Shanghai,Shanghai,138#Che Ting Road,Songjiang District
- Country/Region : China
- Zip : 201611
Sandwich panel line - (Double belt) laminating press
Related Product Searches:Sandwich panel line - (Double belt) laminating press,High Quality,sandwich panel line, sandwich panel machine
16-38 meter Laminator with Side Guide System
1.The Laminator is of high quality with design based on years of manufacturing experience and feedback from operating units. It is 15-36.5 meters long (centerline of sprocket to centerline of sprocket) by 1320 mm wide isochronous chain-plate conveyors will basically be similarly constructed .The upper conveyor will be supported on hydraulic cylindric lift and the guide units mounted on the lower conveyor.
2. The frame of the conveyors will be of structural steel construction. The frames will be the frame cross-structures.
3. The upper and lower belts are driven on head shafts mounted on anti-friction bearing and are equipped with take up units to maintain proper tension. The take up units will also compensate for thermal expansion and contraction.
4. Hydraulic cylindric lift will raise and lower the upper conveyor to provide a gap of 40mm to 200mm between slat working surfaces. Vertical guides for the upper conveyor are provided.
5. Horizontal distance between the two sides nylon seal blocks can be adjusted so can meet requirements of different width’s sandwich panel. The width is from 600mm to 1200mm.
6. Two variable speed isochronous AC drive motors run the laminator conveyor. The prime mover and gearbox is directly coupled individually to the upper laminator conveyor and lower conveyor. Speed is variable with a range of 1-8 meters/minute.
7. Side guide system to provide end sealing of the panel is integrated. Adjustment is through three phase motor with digital readout for set with position. Four sets of profile-specific side guides block is included. Yongming co., ltd will provide detail drawing of permanently affixed side guides to allow customer to match up profile-specific side guide block that they will manufacture in-house or source locally for other profile and product thickness requirements
8. Controls for the operation of the laminator will be located in a centrally mounted control panel.
9. Laminator comes equipment with an indirect electric heater system, used to heat the laminator conveyor belt plates.
Sandwich panel line - (Double belt) laminating press